SERVICES

We offer a complete bandsaw blades service of and consulting.

services

Do not you want to waste time with grinding the belts? Leave your worries on the experts. We guarantee a perfect cut on professional machines. By that you eliminate the possibility of cracking, the belt will last longer sharp, and particularly, you will have less to worry about.

!!! We provide collection and distribution with our own cars at regular weekly intervals to the Czech and Slovak Republic!!!

Make use of our rich experience with bandsaw blades. If your saw is troubling you with cracking, imprecise cut, or other problems, feel free to contact us.

Immediately you will be attended by one of our professionally trained sales representatives. We will promptly propose solution to the problem and you will get rid of your worries. We always try to live up to our motto: „the joy of cutting”.

praskani pasu

Does your bands crack?
Check up whether everything is in order.


PRINCIPLES FOR CUTTING WITHOUT TROUBLES

Do your bandsaw blades crack? Check out few principles that are necessary to follow.

Grinding of bandsaw blades:

  • The cut must be smooth without scratches
  • Pay attention to burnt places caused by taking on large quantity of material

You have selected the correct profile of the tooth?

  • depending on sawing log a different angle on the cutting front of tooth is selected for soft and another for hard wood (19 ° - 21 ° hard wood, 24 ° - 25 ° soft wood)
  • teeth spacing: smaller spacing for hard wood (30, 35 mm), larger for soft wood (40, 45 mm)
  • Tooth depth: the deeper is the tooth, the more susceptible the tooth is to cracking. Too low tooth can be overloaded and fails to take out the necessary amount of sawdust.

Band rolling

  • Bandsaw blade in bending must be of a clear profile by gear camber,
  • the bandsaw blade at the cutting must while in tension in complete bandsaw blade plane. If in this place is overhang, the cut will not be straight, the belt has a tendency to deflect from the plane of the cut and to float.

Technical condition of saw

  • adjustment of saw wheels: wheels must be in reciprocal plane. In both the horizontal and vertical
  • camber on wheels: on the camber must not be any trimmer. The camber must be smooth and the band must sit over all their contact area. After put on of the band, overlap of the saw must be about 3 to 5 mm from the root of the tooth
  • saw travel must be parallel to the cutting plane of the band
  • correct setting of guides and their condition. Guides are to be gently laid on the band. They must be in the perfect plane and clean. Guides must be checked several times a week and always have prepared a backup spare
  • saw bearings. They must not get overheated, must not hum and have no clearance
  • wheel scraper. Wheel scrapers must abut against the wheel on the whole surface, and continuously remove dirt from them. Between band and wheel must not get any dirt. Felt scrapers relate to this as well.